12
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
Press the Up button:
-
All 4 blinds will move upwards.
►
6. Adding a new Telis 4 RTS
6.1 Identifying the original control point
6.1.1 Installation recommendations
To add a Telis 4 RTS, use the control point linked to the product
-
which controls only this product: pressing the Down or Up button only
causes movement of the product to which the new Telis 4 RTS must
be connected.
Caution! If there is no longer a control point linked to the product (all
the control points are broken or have been lost), contact the Somfy
assistance service.
N.B.: These instructions only describe the installation procedure for an addi-
tional Telis 4 RTS of the "individual control" type. Refer to the instructions for
advanced functions available on the Internet (address on the back cover of
these instructions) to install a control referred to as "group control".
On some roller products, inputs in programming mode and the addition
-
or deletion of a control point are signalled by a series of beeps emitted
by the motor. On other products, this is signalled by a brief movement
of the product.
Caution: If the product does not emit a beep or make a brief movement,
please contact the Somfy assistance service.
Place the product in the midway position before installing the new
-
Telis 4 RTS so that the movements can be easily seen.
6.1.2 Original control points
Find the original control point in the list below and refer to the para-
-
graph given to add the new Telis 4 RTS:
1) Control point fixed to the wall with a
single button, called a One-touch
point, see paragraph 6.2;
2) Control point fixed to the wall with
Up/STOP/Down buttons, called a
Point with Up/STOP/Down buttons,
see paragraph 6.3;
3) Programmer type control point,
called a Timer (3), see paragraph
6.4;
3
2
1
