19
Copyright © 2008 Somfy SAS. All rights reserved.
Telis 4 RTS
6.4.2 Adding the Telis 4 RTS
Switch the mains power supply back on
-
or reconnect the battery to the motor.
-
Press the tab (c) until the product
moves briefly (or there is a series of
3 beeps): the programming function is
activated for approximately 2 minutes.
Take the new Telis 4 RTS.
-
-
Press the Selection button (E) to light
up the indicator light that corresponds
to the channel to which the product will
be associated.
-
Press the PROG button (F) on the
new Telis 4 RTS briefly with the tip of
a pencil: the product will make another
brief movement (or emit a series of
8 beeps) to indicate that the new Telis
4 RTS is stored.
-
Press the Down button on the new Telis
4 RTS:
If the product is lowered, the
-
Telis 4 RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
Replace the original control point front
-
cover:
Insert the front cover on its brac-
-
ket, allowing the buttons to come
through their housings.
Press the front until it clicks, to fix
-
the front cover in its bracket.
c
E
F
