We reserve the right to make changes due to technical improvements.
Chronis RTS/RTS L
6
What do I do if
This menu allows the unit to be checked and additional functions to be set.
To access the menu, press
+
+
simultaneously until
appears on the display.
To change the menu options, press
. To save changes and exit, press
. If no information is entered for approx. 20 seconds,
the diagnosis menu quits automatically.
Display test by activating all
the display segments.
Information about the
software version
Adjustment of the weekday :
International (Int) or German (dEU)
Adjustment of the signal repetition : 0 to 4 beams (1 to 5 signal repetitions)
Adjustment of the operating mode
Stn : standard mode for roller shutters and screens
vbEU : Venetian blind “european mode”
(Centralis indoor RTS VB EU mode / Orienta receiver EU mode)
vbUS : Venetian blind “US mode”
(Centralis indoor RTS VB US mode / Orienta receiver US mode / RTS 25 DC / Power 2.5 RTS)
This function must be choosen to drive ALTUS; OREA; OXIMO light sensor controlled into IP position.
rSIP : Automatic order by down time to IP position (only possible with a receiver with IP position)
7
Diagnosis menu
Mo
1
Di
2
Mi
3
Do
4
Fr
5
Sa
6
So
7
Mo
1
Di
2
Mi
3
Do
4
Fr
5
Sa
6
So
7
Mo1Di2Mi3Do4Fr5Sa6So7
s
W
+
-
Nothing is shown on the display
Check whether the insulating strip has been removed from the batteries.
Take out and reinstall the batteries.
The clock does not work
Take out and reinstall the batteries.
Automatic commands are not carried out
Increase transmission repeat rate (see chapter 7 “Diagnosis menu: rts”).
Change the position of the Chronis RTS/RTS L unit.
Automatic commands are repeated unnecessarily
Set transmission repeat rate to zero.
Blinds are not always operated by automatic commands
Change to blinds mode (see chapter 7 “Diagnosis menu: rts”).
> 3 secs.
