We reserve the right to make changes due to technical improvements.
UP button
STOP/IP button
DOWN button
Display
SET button
Calendar button
Programming button
4.1
First use
When setting or changing values:
➜
Values which flash can be changed.
➜
Always press
to end and store entered values.
➜
If no information is entered for approx. 20 seconds, the programming menu quits automatically.
Information entered before this will not be stored.
Before setting the time and date, check whether the equipment’s summer/winter time setting is correct.
Winter time is the factory default setting.
Setting the date
1. Press
briefly
➜
date displayed (if no information entered
within 10 seconds, display jumps back to time)
2. Press
briefly
➜
day flashes.
Set day using
button
3. Press
briefly
➜
month flashes.
Set month using
button
4. Press
briefly
➜
year flashes.
Set year using
button
5. Press
briefly (save)
➜
time displayed.
The day of the week is set automatically. The day/month/year
selection can be gone through in reverse order using the DOWN
+
-
+
-
+
-
Setting summer or winter time
The corresponding setting is shown on the display as “S” for summer time or
“W” for winter time.
Changing from winter to summer time
1. Press
briefly
➜
time flashes.
2. Press
for more than 5 seconds
➜
display shows “S” for summer time.
3. Press
briefly (save)
➜
time displayed
Changing from summer to winter time
1. Press
briefly
➜
time flashes.
2. Press
for more than 5 seconds
➜
display shows “W” for winter time.
3. Press
briefly (save)
➜
time displayed.
Chronis RTS/RTS L
2
1.) Fix wall mounting
plate to the wall
using two screws
3.) Place the cover.
2.) Slide the Chronis
RTS/RTS L onto
the wall mounting
plate from above
Hour
Summer/Winter time
Next command
and time
Day
Month
Year
Min.
Current day
1 : Monday
2 : Tuesday
3 : Wednesday
4 : Thursday
5 : Friday
6 : Saturday
7 : Sunday
1
1
Cover
Chronis RTS / RTS L
Wall mounting plate
Tip: Before assembly, check that there is adequate radio reception at the intended location.
Programming button
The procedure for tuning a Chronis RTS to a radio receiver depends on the type of receiver used. It is important
to follow step by step the detailed description of the relevant programming procedure in the instructions which
accompany each individual SOMFY RTS radio receiver.
– Activate your chosen receiver (please refer to the installation guide of the relevant receiver).
– Press the programming button on the Chronis RTS/RTS L.
– “Prog” will appear on the display. Hold down the button until the RTS receiver confirms the tuning process.
Setting the date
1. Press
briefly
➜
date displayed (if no information entered within
10 seconds, display jumps back to time)
2. Press
briefly
➜
day flashes.
Set day using
button
3. Press
briefly
➜
month flashes.
Set month using
button
4. Press
briefly
➜
year flashes.
Set year using
button
5. Press
briefly (save)
➜
time displayed.
The day of the week is set automatically. The day/month/year selec-
tion can be gone through in reverse order using the DOWN button.
+
-
+
-
+
-
Setting the time
1. Press
briefly
➜
time flashes
2. Set time using
button
3. Press
briefly (save)
➜
time displayed
+
-
3
Radio programming
4
Timer programming
