We reserve the right to make changes due to technical improvements.
1
Chronis RTS/RTS L
Supply:
Degree of protection:
Operating temperature:
Environmental conditions:
2 x 1,5 V DC (Type : AAA LR03)
IP 30
+5°C to +40°C
dry living areas.
80 mm
80 mm
27 mm
INSTALLATION
guide
Ref.9007503
C
inteo
CHRONIS RTS / RTS “L”
Hereby, SOMFY, declares that this equipment is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
A Declaration of Conformity is available at the web ad-
dress
www.somfy.com
Heading
CE
Chronis RTS/RTS L is the programmable radio time switch in the new inteo-control range from SOMFY, which
controls your electrically operated roller shutters or external blinds. Operating commands are transmitted by ra-
dio signal, significantly reducing the cost of installation. The radio signal has a range of up to 300 metres in free
field, or 20 metres through two concrete walls in buildings.
Chronis RTS/RTS L has several functions, which can fulfil individual requirements at the touch of a button:
Weekly program
set different times for automatic opening and closing of your roller shutters every day of the week.
Holiday security
set random times to give the impression of an occupied house.
Cosmic
roller shutters are activated automatically according to the times the sun rises and sets.
OFF setting
The automatic control can be turned off at the touch of a button.
A detailed description of each mode of operation is given under point 4 “Programming”.
1
Characteristics
2
Installation
The range of radio control is limited by laws regulating radio devices and by building design. When planning, please ensure that there is adequate radio reception.In order
not to affect quality of reception, a minimum distance of 30 cm between a Chronis RTS/RTS L unit and a radio receiver should be maintained.
Chronis RTS/RTS L should not be installed in the immediate vicinity of metal surfaces. Powerful local transmitter equipment (e.g. cordless headphones) with a transmis-
sion frequency identical to the Chronis RTS/RTS L can affect its function.
Insulating strip
The equipment is delivered with the batteries installed.
An insulating strip is placed between the battery pole and the contact.
This must be removed before installation, then the time is shown on the display.
All functions of the Chronis RTS also apply for the Chronis RTS L for light sensor. Please read the instructions included with the light sensor.
