Copyright © 2009-2011 Somfy SAS. All rights reserved.
Easy Sun io
11
EN
Symbol
Alert
Explanation
Sun sensor
batteries low
Replace the sensor's batteries: refer to the relevant operating guide
For the Sunis WireFree™ io, see the section
«
Replacing the Sunis
WireFree™ io batteries
»
.
Wind sensor
batteries low Replace the sensor's batteries: refer to the relevant operating guide.
Order
interrupted
Another control point is sending an order to the motor or receiver.
For all other alerts, contact the installer.
7.2 Replacing the batteries
Never use rechargeable batteries.
When replacing the batteries, all the programmed settings are stored with no time limit.
If the remote control is not used for prolonged periods of time, it is recommended that the batteries
be removed.
-Open the Easy Sun io by lifting the cover; no tools are
required for this operation.
-Insert 2 new 1.5 V AA alkaline batteries (LR6), observing
the correct polarity.
-
c382#2E3#>JA39#J7#2E3#N?01#<M7#5J;
8. TECHNICAL DATA
c?65J#@93QM37>1/#efeKeg`#hiSP#295KH?76#5JKEJ43>J729JIL#2OJKO?1P#jO52E#k\Dl#^k50237#\3@J93#D?IU_P#
which searches for an unoccupied radio frequency prior to transmitting.
Range: 20 m through 2 concrete walls, 40 m with a Repeater io.
Protection rating: IP 30.
Safety level: Class III.
Operating temperature: 0°C to +60°C.
Dimensions of the Easy Sun io in mm (h x w x d): 165 x 45 x 22.
Dimension of the wall bracket in mm (h x w): 77 x 29.
Power supply: 2 AA (LR6) 1.5 V batteries.
Maximum number of linked io receivers or motors: 15.
Maximum number of linked io wind sensors: 3.
Maximum number of linked io sun sensors: 1.
Please separate the storage cells and batteries from other types of waste and recycle them
via your local collection facility.
Содержание Easy Sun io
Страница 58: ...12...