manualshive.com logo in svg

SOMFY Chronis Smoove Series, Руководство по эксплуатации, Страница: 36 / 40

Поделиться
Скачать
SOMFY Chronis Smoove Series Скачать руководство пользователя страница 36

36/40

Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images

Chronis & Soliris Smoove

[ Back to Contents ]

Interactive operating instructions

Manual Operation of a Zone

On the Soliris / Chronis Smoove IB+, the number of zones appears on the 
right.

1.  Press the OK-Menu button in the main display to go to "Quick Menu".

 

> The "Select zone" option appears.

2.  Select the corresponding zone operation.

 

> The selection is now always taken into account with manual 

operation.

3.  Confirm and select the zone to be operated.

 

> You can now set off a move command in this zone only.

Note: 

When a move command is set off, the zone appears in the display 

next to the move direction symbol.

4.  Go to the Quick Menu to check which zone is being operated.

 

> The zone being operated appears in the first menu point ("Zone 

Operation 1" for the operation of Zone 1 or "Zone Operation 1-3" 

for the operation of all zones).

Mon.

13:09

20:00

1

2
3

Zone 1

Add device

Remove device

Select zone

All zones

Zone 1

1

Confirm zone 1

Remove device
Auto from 19:10

7. SETTINGS MENU

Содержание Chronis Smoove Series









































Отзывы:

Нет отзывов