manualshive.com logo in svg

SOMFY Chronis Smoove Series, Руководство по эксплуатации, Страница: 33 / 40

Поделиться
Скачать
SOMFY Chronis Smoove Series Скачать руководство пользователя страница 33

33/40

Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images

Chronis & Soliris Smoove

[ Back to Contents ]

Interactive operating instructions

Positions 

Depending on the controlling, Glare protection, Intimacy, my-Position and 
Position 2 can be set.
1.  Select the corresponding position.
2.  Confirm.

Note: 

For all positions, the same procedure can be repeated.

Position

Under "Glare protection value set", you can set the position.

1.  Set the position of the end products in percent (0% top, 100% bottom).
2.  Confirm.

Tilt

Note: 

Only with Venetian blinds.

Under "Glare protection tilt set", you can set the angle.

1.  Set the angle in seconds (0.0 seconds minimum, 3 seconds maximum).
2.  Confirm:

Test

Under "Glare protection test", you can check the set position.
1.  Select "Yes".
2.  Confirm.

 

> The end products move to the set position.

Positions

Glare protection

Intimacy

Glare protection

Position

Test

Glare protection

Position

Tilt

Positions

my Position

Position 2

70

%

Glare protection value set

0.5

s

Glare protection tilt set

Glare protection test

No

Yes

7. SETTINGS MENU

Содержание Chronis Smoove Series









































Отзывы:

Нет отзывов