13/40
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
Chronis & Soliris Smoove
[ Back to Contents ]
Interactive operating instructions
5. MANUAL MOVE COMMAND
In the main menu the following move commands can be made manually:
-
UP symbol :
Moves up and the symbol appears in the display.
-
DOWN symbol : Moves down and the symbol appears in the display.
-
"my" symbol
: When the end products are moving, they are stopped. The symbol
appears in the display.
When the end products are stationary, they move to the already set
"my" position. In the display, the symbol appears.
Note for Venetian blinds operation:
A short press on the UP symbol tilts the Venetian blinds up.
A long press on the UP symbol moves the Venetian blinds up.
A short press on the DOWN symbol tilts the Venetian blinds down.
A long press on the DOWN symbol moves the Venetian blinds down.
If you give a short press or if there is a possibility that the end products only move very slightly, adjust
the start delay parameter (see "
Back to Start delay
").
Setting "my" Position
In the factory state, the "my" Position is 70% set (in the case of Venetian blinds without turn).
1. Move the end products to the desired position ("my") and use the "my-soft key" to stop them.
2. Press "my-soft key" for more than 5 seconds to save the new position.
> The following message appears: "My position set".
3. To delete the position, move the end products in the "my" Position.
4. Press the "my-soft key" for more than 5 seconds.
> The following message appears: "My position cleared".