28/40
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
Chronis & Soliris Smoove
[ Back to Contents ]
Interactive operating instructions
7.4. Rain Function (Soliris versions)
The Rain Function is a safety function that protects the end products against damage due to rain.
When raining, the end products move to the upper-end position.
When there is no rain for more than 15 minutes, the manual operation, sun automatic and the timer
are all released again.
Warning:
The Rain Function must be activated deliberately.
• Confirm the function.
> The following options are available.
If you have selected "No sensor" at start-up, you will be guided automatically to sensor configuration
(see "
Back to Configuration of the rain sensor
").
Switching ON/OFF
You can switch the functions on and off.
1. Confirm the selection.
2. Select "ON" or "OFF".
3. Confirm.
Note:
In the factory state, this function is switched off.
Actual level
This menu showns whether rain has been detected by the sensor.
With this function, the wiring and functionality of the rain sensor can be
checked.
Leave the menu with the soft key or ok/menu button.
Configuration menu
Wind Function
Rain Function
Rain Function
ON/OFF
Actual condition
Rain Function
Actual condition
Configuration
Rain sensor ON/OFF
OFF
ON
Rain sensor actual level
not active
7. SETTINGS MENU