The 4 motors can be moved to one or two selected intermediate positions. The recording and the calling-up of an intermediate position
can only be carried out by activating a connected “IP key” (see wiring diagram).
The first intermediate position is recorded from the upper end limit position of the system (shutter/awning up).
The second intermediate position is recorded from the lower end limit position of the system (shutter/awning down).
- Move the shutter/awning to the upper end limit position with the local switch.
- Press simultaneously the DOWN key and the “IP key” on the local switch (for approx. 2 seconds) until the shutter/awning moves downwards.
- Stop the shutter/awning at the desired position which is to be the intermediate position from the upper end limit position,by pressing:
Simultaneously the up and down keys
or the IP key
- The intermediate position can be adjusted with the local switch.
- Press and hold the “IP key” for at least 2 seconds
➜
the intermediate position from the upper end limit position has been registered.
4.1 Recording the intermediate position from the upper end limit position
Upper end limit position
Lower end limit position
Intermediate position
- Move the shutter/awning downwards to the lower end limit position with the local switch.
- Press simultaneously the UP key and the “IP key” on the local switch (for approx. 2 seconds) until the shutter/awning moves upwards.
- Stop the shutter/awning at the desired position which is to be the intermediate position from the lower end limit position, by pressing:
Simultaneously the up and down keys
or the IP key
- The intermediate position can be adjusted with the local switch.
- Press and hold the “IP key” for at least 2 seconds
➜
the intermediate position from the lower end limit position has been registered.
- When the 4 shutters/awnings are at the upper or lower end limit position, press briefly (less than 2 sec.) the “IP key”.
➜
the shutters/awnings move to the recorded intermediate position.
4.3 Calling up a recorded intermediate position
4.2 Recording the intermediate position from the lower end limit position
- Move the 4 shutters/awnings to the intermediate position.
- Press the “IP key” for at least 10 seconds
➜
the intermediate position has been deleted.
4.4 Deleting a recorded intermediate position
All 4 motors can be moved to a selected intermediate position with a slat angle. The intermediate position is recorded from the upper end
position. The slat angle can also be called up at any time after a DOWN command has been activated, whatever the position of the blinds.
The recording and the calling-up of the intermediate position can only be carried out by activating a connected “IP key” (see wiring dia-
gram).
4
Intermediate position
With roller shutters and awnings
5
Intermediate position
With Venetian blinds
