Quick Programming Reference Guide:
1) Install software and USB to RS-485 device on pc
2) Set communication port settings for USB to RS-485 device
3) Locate motor controller ID and convert to hexadecimal
-OR-
read the ID via programming software
4) Program run times and group addresses
5) Program intermediate positions if necessary
Accessories:
RTS Module - 1860105
IR Module - 1860098
IP Interface - 1810850
Programmable Switch 3 button - 1810827
Programmable Switch 6 button - 1810828
USB to RS-485 convertor - 9015260
RS-485 Repeater - 1810816
Animeo Decora Single Switch - 1800432 (White)
Animeo Decora Single Switch - 1800064 (Ivory)
Animeo Decora Dual Switch - 1800074 (White)
Animeo Decora Dual Switch - 1800075 (Ivory)
DIN Rail - 9011975 (14”)
*Bus Power Supply - 1822111
*Required if programmable switches in use