manualshive.com logo in svg

SOMFY Animeo 1870452, Руководство пользователя

Поделиться
Скачать
SOMFY Animeo 1870452 Скачать руководство пользователя страница 17

 

animeo KNX 4 DC Motor Controller 

28.02.2019 

 

WM 24 V DC 

 
 

 2019 Somfy Activités SA 

 Ref. 5147817A 

17/56 

No.  Object name 

Type 

DPT_ID  Description 

96 

Switch input 1: UP/DOWN 

1 bit 

1.008 

A long pressing of the button on input A gener-
ates a telegram on this communication object 
with the value 

“0”. The Venetian blind moves UP. 

A long pressing of the button on input B gener-
ates a telegram on this communication object 
with the value 

“1”. The Venetian blind moves 

DOWN. 

97 

Switch input 1: STEP/STOP 

1 bit 

1.008 

A short pressing of the button on input A gener-
ates a telegram on this communication object 
with the value 

“0”. The slat turns UP. When the 

Venetian blinds are making a move then a short 
pressing of the button generates a stop com-
mand on input A. A short pressing of the switch 
on input B generates a telegram with the value 
“1”. The slats turn CLOSE. When the Venetian 
blind is making a move then a short pressing of 
the button generates a stop command on input B. 

98 

Input 1: A, Switch 

1 bit 

1.001 

According to the parameter settings and the state 
at input 1 contact A a switching telegram is sent 
over this communication object with the value 

“1” 

or 

“0”. 

99 

Input 1: B, Switch 

1 bit 

1.001 

According to the parameter settings and the state 
at input 1 contact B, a switching telegram is sent 
over this communication object with the value 

“1” 

or 

“0”. 

100  Switch input 1: A, 8-Bit value 

1 Byte  5.010 

According to the parameter settings, with a rising 
edge on input 1 contact A, the parameterized 
value (0-255) is sent. 

101  Switch input 1: B, 8-Bit value 

1 Byte  5.010 

According to the parameter settings, with a rising 
edge on input 1 contact B, the parameterized 
value (0-255) is sent. 

102  Switch input 1: A/B, Dimming 

1 Bit 

1.001 

On/Off: 
According to the parameter settings, with a short 
pressing at the input 1 contact A/B, a telegram is 
generated with the value 

“1” or “0”. 

Toggle/Toggle: 
According to the parameter settings, with a short 
pressing at the input 1 contact A/B, a telegram is 
generated with the value 

“1” or “0”. 

103  Switch input 1:  

A/B, Dimming, Value 

4 Bit 

3.007 

Brighter/darker dimming: 
According to the parameter settings, brighter dim-
ming is done with a long pressing at the input 1 
contact A. According to the parameter settings, 
darker dimming is done with a long pressing at 
the input 1 contact B. 
Brighter/Darker toggle: 
According to the parameter settings, over input 1 
contact A, 100 % is dimmed with longer pressing 
of the switch. When releasing the corresponding 
switch at the input A, a stop command is gener-
ated. The last activated dimming step becomes 
inverted. According to the parameter settings, 
over input 1 contact A, 100 % is dimmed with 
longer pressing of the switch. When releasing the 
corresponding switch at the input B, a stop com-
mand is generated. The last activated dimming 
step becomes inverted. 

Содержание Animeo 1870452

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды