Commissioning and standard use
21
EN
- SGS LINE installation and operating guide - SOMFY
EN
2
2.4 Closing the control unit
1
2
Affix summary label (g) to the back of the control unit cover.
Close the control unit and screw in the cover.
2.5 Standby/Reactivating the control electronics
Once the auto-programming process has been completed, the
electronics automatically switch to standby aer 5 minutes of
inactivity to save energy.
In standby mode, all indicator lights are off.
To check whether the motorisation is switched on or to check/
modify the parameter setting, press the
button for 2 seconds to
reactivate the electronics. The electronics will automatically switch
to standby aer 5 minutes of inactivity.
2.6 Completely opening and closing the gate
The remote controls supplied with the kit are already memorised
and programmed so that button 1 on the remote controls activates
complete opening of the gate.
Button 1
•
Gate closed: press button 1 on the remote control to open the gate
fully.
STOP
•
Gate moving: Press button 1 on the remote control to stop the
gate.
•
Gate open: Press button 1 on the remote control to close the gate.
2.7 Obstacle detection
If an obstacle is detected (abnormal force on the motorisation):
• When the gate is opening
: the gate will stop.
• When the gate is closing
: the gate will stop and reopen.
2.8 User training
All users must be trained on how to safely use this motorised gate (standard use and unlocking principle) and on the mandatory periodic
checks.