SOMA Pulsar-23, Руководство пользователя

Страница: 29 / 172

29 The Pulsar-23 Notebook : Reference & Guide
Bass - Bass Mono Synth
Sound Generators
2
Item Function Label Control Description
1 Pitch Control CV IN Pin Pitch control for the specific Bass module audio. Control is
logarithmic, Volt / Octave with a range of 4 octaves over 4 Volts.
2 DCO Mode CV MIDI PRC Switch Selects CV - Control Voltage, MIDI control for the oscillator. Also
PRC - Percussive mode for drum sounds.
3 Shape Modulation Input MOD Pin Connection point for incoming CV for modulation of shape.
4 MIDI Learn - Shape LRN Button Learn function to assign mapping of incoming MIDI CC.
5 Shape SHAPE Knob Control of the DCO waveform shape in pitch mode. For PRC, the
resonance is controlled with harmonic changes.
6 Warp Modulation Input MOD Pin Connection point for incoming CV for modulation of warp.
7 MIDI Learn - Warp LRN Button Learn function to activate mapping of incoming MIDI to warp.
8 Warp WARP Knob Controls the amount of post oscillator wave-shaper loading. In
PRC mode adds drive and cross modulation.
9 Phase Modulation Input MOD Pin Connection point for incoming CV for modulation of DCO Phase.
Acts as sidechain input in PRC Mode.
10 Amount of Modulation AMT Knob Controls the amount of CV that is applied on the phase of the
DCO. The CV is applied at the ‘MOD’ connection pin.
11 Oscillator Pitch Tuning TUNE Knob Controls the oscillator pitch over 5 octaves or +/- 1 Semitone
when operating in MIDI mode.
12 LPF Modulation MOD Pin Connection point for incoming CV for modulation the frequency
cutoff of the low pass filter.
13 Low Pass Filter Freq LPF FR Knob Controls the cutoff frequency of the low pass resonant filter
14 Low Pass Filter Res Q Knob Controls the resonance level of the low pass resonant filter
a
External Signal EXT Pin Input of external signal which is processed in the Bass synthesis
function. Incoming signal applied before LPF.
b
BD Output OUT Pin Output of the Bass synth signal, sent before the volume control.A
trigger for the envelope will also trigger the ‘OUT’
c
Volume VOL Knob Controls the main volume of the Bass Module audio level. The
‘EXT’ pin and (FX) Send is output before this control is applied.
d
FX Send FX Knob Controls the amount of Bass signal that is sent to the FX section.
Output is pre-fader, i.e. before the volume control is applied.
e
Envelope Output ENV Pin Output from the module’s envelope generator.
f
Trigger Input / Out TRIG Pin Trigger in to start the modules envelope generator or loop rec
g
Envelope attack ATT Knob Adjusts the attack time period for the modules envelope
h
Envelope Release REL Knob Adjusts the release time period for the modules envelope
i
MIDI Learn LRN Button Learn function to activate mapping of incoming MIDI to module.
j
Rec Play Mode REC PLAY Switch Loop recorder mode selector.
k
Loop Mode Indicator LED Mode indicator - amber means loop recording active.
l
Drum trigger indicator LED Drum trigger indicator - red.
m
Discrete clock point CLK Pin Input for alternative, external clocking for loop recorder.
n
ADD Button ADD Sensor Manual trigger for playing or recording drum hits.
o
DEL Button DEL Sensor Manual trigger for deleting / muting recorded drum hits.
M
o
d
u
le
S
o
u
n
d
&
T
im
b
re
V
C
A
E
n
ve
lo
p
e
&
L
e
ve
ls
L
o
o
p
e
r
&
B
u
tt
o
n
s