Model UJ5 Assembly Instructions
This is a photo of what your Union UJ5 drum set will look like when assembled.
Parts List
Bass Drum Components
Other Drums & Hardware
(1) 16” bass drum shell
(1) drum seat (cushion & base)
(2) 16” bass drum heads
(1) Cymbal stand
(2) hoops (rims)
(1) 12” brass cymbal
(12) claws with tension rod bolts & washers
(2) tom mounting arm
(2) short support legs
(1) 10” tom drum (assembled)
(1) bass drum pedal
(1) 8” tom drum (assembled)
Floor Tom Components
(1) snare drum stand
(1) 13” floor tom shell
(1) 10” snare drum w/knob (assembled)
(2) 13” floor tom heads
(1) hi-hat stand & clutch assembly
(2) chrome hoops (rims)
(2) 9.5” brass hi-hat cymbals
(8) long tension rod bolts & washers
(1) tuning key
(3) long support legs
(2) drum sticks
Bass Drum Assembly:
Lay bass drum shell flat on the floor to install heads. Place logo drumhead centered onto the side of the drum shell closest
to the two support legs. Place a hoop over the head and insert the tension rod bolts through the washers then through the
claw and into the 6 threaded receptacles (lugs) on the shell. Head should be tensioned with the tuning key to a resonant
pitch, tighten bolts gradually in a criss-cross pattern (do not over-tighten). Repeat process for the other head. Insert legs
into the bass drum receptacles and adjust stable on the floor. Clamp the bass drum pedal to the hoop on the non-logo side.
Depress pedal to sound drum.
Drum Seat Assembly:
Install seat cushion onto 3-leg base. Adjust seat height so child can comfortably depress the bass drum pedal.
Floor Tom Assembly:
Lay floor tom shell flat on the floor to install heads. Place one 13” head over shell, set one 13 “ rim on top so that it is evenly
seated on the drum head. Line up the holes on the rim to the lugs on the shell and install long tension rods w/washers through
rim holes and into lugs. Head should be tensioned with the tuning key to a resonant pitch, tighten bolts gradually in a criss-cross
pattern (do not over-tighten). Repeat installation process for the opposite side head & rim. Insert 3 long support legs into each
of the 3 receptacles, adjust height & tighten wing nut to secure.
Snare & Stand Assembly:
Expand tri-pod legs to balance stand on floor. Set the snare drum securely between the 3 adjustable arms.
Position the snare drum on stand, as pictured, behind bass drum and to the left of the bass drum pedal.
*See reverse side for more information.
