SOMA Pulsar-23 Скачать руководство пользователя страница 69

Страница: 69 / 172

The Pulsar-23 Notebook : Reference & Guide

Looper & Clock

NOTES

▌

SELECTING LOOPER RECORDER BANKS

1. Hold [BANK] + Tap [ADD] or [DEL] button for the bank to select. The

BANK button is located in the ‘REC CONT’ section and the ADD/DEL
are located in each sound generator module.

•

BD - Bank 1

•

BASS - Bank 2

•

SD - Bank 3

•

HHT - Bank 4

2. The module LED located in the looper section to the left of the REC

PLAY switch will illuminate yellow when the bank is selected.

3. The bank selected will contain 4 looper channels, one for each sound

generator drum module.

▌

COPYING / PASTING LOOPER RECORDER BANKS

1. Select {REC} mode, toggle left, on the REC PLAY switch for the looper

channels to copy. Only channels set to ‘REC’ will be copied.

2. Hold [BANK] + Tap [ADD] or [DEL] button for the bank to select. This

bank can be played or edited and will be copied.

3. The module LED located in the looper section to the left of the REC

PLAY switch will illuminate yellow when the bank is selected and by
default, will be held in memory and is therefore the copy source.

4. Hold [BANK] + [ADD] + [DEL] on the destination bank, represented by

the sound generator module selected. Keep the buttons held for the
duration of the loop to paste the copied bank into the new location.

5. To copy only part of the loop, Hold [BANK] + [ADD] + [DEL] on the

destination bank, represented by the sound generator module selected.
Keep the buttons held for the length required to paste part of the copied
bank into the new location.

Содержание Pulsar-23













































































































































































Результаты поиска

Содержание Pulsar-23

Отзывы:

Похожие инструкции для Pulsar-23

Бренды по названию

Популярные бренды

SOMA Pulsar-23, Руководство пользователя

Результаты поиска

Содержание Pulsar-23

Отзывы:

Похожие инструкции для Pulsar-23

Бренды по названию

Популярные бренды