SOLZAIMA SZM A 18 KW, Инструкция по эксплуатации

Страница: 42 / 94

39
This board has two entries "remote" and "therm" to conect the chrono-thermostat into
the "remote" the user of the start (closed contact NC) and stop (open contact NO) the
boiler.
If connecting into the "thermostat" This will only change the power of the machine
between minimum output (open contact NO) and maximum power (closed contact
NC).
Note: the external command, as a rule, comes with a manual. In the case of wireless
remote control is necessary to connect the two wires as shown in the following figure:
a)
b)
Figure 18 – Wireless remote command connection
For the wired remote control, the black and grey wires must be
connected to the receiver as shown in the following figure.
Figure 19 – Wired remote command connection
18. Instructions for remote control assembly
Colour codes:
CN - grey
N - black
C - brown
A - blue