Solwise SAR715PVW, Инструкции по установке

Страница: 27 / 202

Solwise SAR715PVW ADSL Ethernet Router User’s Guide Chapter 4 . Quick Router configuration using your browser
27
•
Up-Time; the length of time (in hours:minutes:seconds) that
your current session has been connected for
•
Version; information about the software release which has
been used to build the image running on your ADSL router.
•
Vendor;
The name of the Vendor supplying the ADSL
router. The default setting for this is GlobespanVirata.
Defined Interfaces
This section lists LAN interfaces that have been defined
Each interface listed has a Show Statistics hyperlink associated with
it. Click on this for detailed information about some/all of the
following (depending on the interface type and configuration):
•
the interface
•
connection details
•
port configuration
•
service parameters
4.2 Setting up a basic NAT router configuration
Please note the following:
The default IP address for the 8.2 firmware is 192.168.0.1
The default configuration username and password are admin.
4.2.1 Clearing to factory defaults
Make sure your PC is on an IP address in the same subnet as the
715PVW (e.g. 192.168.0.2). Next, enter the address of the router in
your browser address line (i.e. 192.168.0.1)…
The main status page for the router should display.
If it asks for a Username/Password to enter configuration then use
‘admin’ and ‘admin’….