Solwise SAR715PV, Инструкция по эксплуатации

Страница: 66 / 188

Chapter 5 . The Configuration Screens in More Detail Solwise SAR715PV ADSL Ethernet Router User’s Guide
66
3. This page allows you to configure your reserved mapping. Add
specific values for the following table entries:
• Global IP Address ; if you are mapping from a global IP address,
type the address here. If you are mapping from a security interface,
type
0.0.0.0 .
• Internal IP Address ; the IP address of an individual host inside your
network.
• Transport Type ; specify the transport type that you want to map
from the outside interface to the inside.
• Port Number ; the port number that your transport uses.
4. Once you have configured the table, click on Add reserved
mapping
. The table is refreshed and the reserved mapping is added
to your NAT configuration.
To delete a reserved mapping setup, click on the Delete hyperlink,
then click on the Delete Reserved Mapping button.
Click on Return to Interface List to display the Security Interface
Configuration page.
Configuring Firewall policies
A policy is the collective term for the rules that apply to incoming
and outgoing traffic between two interface types. Before you can
create a Firewall policy, you need to enable Firewall.
To create and configure a Firewall policy:
1. Go to the
Policies, Triggers and Intrusion Detection
section of the
Security Interface Configuration . Click on Firewall Policy Configuration
The Firewall Policy Configuration page is displayed.
2. Click on
New Policy
The
Firewall Add Policy page
is displayed:
3. This page allows you to configure your Firewall policy. Add
specific values for the following entries: