Solwise SAR715PV, Инструкция по эксплуатации

Страница: 112 / 188

Chapter 7 . How to… Solwise SAR715PV ADSL Ethernet Router User’s Guide
112
7.7 Configuring the ‘Security Interface’ for MS Messenger to work
In order to allow MS Messenger to work correctly you need two
security triggers to allow data flow. The figure below shows the
settings required:
7.8 Firewall Features
The 715PV includes a full featured firewall, with capabilities such as
intrusion detection, packet filtering and NAT. There are many
different ways for configuring a firewall but this section gives an
overview of the options.
7.8.1 Intrusion Detection
Intrusion detection protects you from certain types of common
attacks and will block access from hosts attempting these attacks.
To configure intrusion detection you must first click on the
Configuration/Security
.
Make sure that Intrusion Detection is ticked as enabled.
Click Change State to change the state.
At the bottom of the screen is the Policies, Triggers and
Intrusion Detection section. Click on Configure Intrusion
Detection to configure the options for Intrusion detection.
The following screen then shows the options that can be
configured for intrusion detection. All values should be left
at defaults unless you specifically want to change any of
the settings as per your own security policy.
The only exception is the top two options Use Blacklist
and Use Victim Protection these should both be enabled
so Intrusion detection will be fully functional.