Solwise SAR715PV, Инструкция по эксплуатации

Страница: 49 / 188

Solwise SAR715PV ADSL Ethernet Router User’s Guide Chapter 5 . The Configuration Screens in More Detail
49
2. Type in the network location of the new firmware image that you
want to upload, or use the Browse button to browse through the
network and select the file. Click on Upgrade .
3. Once the file has been uploaded to the RAM of your ADSL
router, it is written to Flash. A status page is displayed confirming
that the upload is complete and telling you how much of the file (in
bytes and as a percentage) has been written to Flash.
4. Once the file has been written to Flash, the Firmware Upgrade
page is refreshed. The page confirms completion of the update and
asks you to restart your ADSL router in order to use the new
firmware. Click on
Restart.
Note
– Upgrading your firmware could take up to 15 minutes to
complete.
5.1.4 Restart
This page allows you to restart your ADSL router. It has the same
effect as resetting your ADSL router by pressing the appropriate
reset button on the hardware.
To restart your system:
1. From the System menu, click on Restart . The following page
is displayed:
2. Click on the Restart button to reset the ADSL router. The
Restart page also provides you with the option of restarting
and restoring the factory default settings. Click in the Reset
to factory default settings box to check it, then click on the
Restart
button. Read the console status output to check how
the reset is progressing.
3. Once the login and password prompt is displayed at the
console, you can login as usual (with login = admin ,
password =
admin
), then refresh the browser that is
running. The Status page is displayed and your ADSL router
has been reset.