©2020 Solwave ovens
Lancaster, Pennsylvania,17603
Page 9 of 16
Part No. 20152604
Original Instructions
Programming
Export Menu via USB Flash Drive
1. READY must be in the display. If not, open and close door.
2. Open the oven door completely.
3.
Insert USB flash drive.
4. Press and hold the 5 key until “USB” appears on the display.
5.
To transfer programming TO the USB flash drive FROM the
oven, press the 2 key.
6. Push the START pad to begin transfer.
• Display will read, “Contacting USB card.”
• Display will then read, “Transferring data from oven to USB”
7. Once programming has been successfully transferred, display
will read, “Done - Loaded ___ Programs.”
• Shut the door to clear the display and begin cooking cycle
Programming Mid-Cycle
Cooking Pause
To add a pause to a programmed cook
cycle:
1.
Press HIDDEN KEYPAD after
entering time or power level.
2. A short beep sounds. This indicates
the program is set for a mid-cycle
pause.
3. Continue programming pad as
desired.
To remove a pause from a programmed
cook cycle:
1.
Press HIDDEN KEYPAD after
entering time or power level.
2. A short beep sounds. This indicates
that the mid-cycle has been
removed.
3. Continue programming as desired.
Hidden Keypad
Import Menu via USB Flash Drive
1. READY must be in the display. If not, open and close door.
2. Open the oven door completely.
3.
Insert USB flash drive.
4. Press and hold the 5 key until “USB” appears on the display.
5.
To transfer programming FROM the USB flash drive TO the
oven, press the 1 key.
6. Push the START pad to begin transfer.
• Display will read, “Contacting USB card.”
• Display will then read, “Transferring data from USB to oven,”
7. Once programming has been successfully transferred, display
will read, “Done - Loaded ___ Programs.”
• Shut the door to clear the display and begin cooking cycle
ERROR CODES:
•
No file:
USB flash drive is empty or does not have the correct file(s)
required for operation.