
©2020 Solwave ovens
Lancaster, Pennsylvania,17603
Page 7 of 16
Part No. 20152604
Original Instructions
Manual Time Entry
To cook food using a specific entered time and power level.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press TIME ENTRY key.
• If pad does not work, open and close oven door and try again.
3. Enter cooking time by using the numbered keys.
4. Press POWER LEVEL key to change power level if desired.
• Press number keypads to enter % microwave power (“1”=10%,
“2”=20%,etc.)
5. If stage cooking is desired, press STAGE key and repeat steps 2
through 4.
• Display changes to cook time and power level for the next
stage.
6. Enter cook time and power level as in steps 3 and 4.
• To add another cooking stage press STAGE key again.
•
Up to four different stages can be programmed.
7. Press START key.
• Oven operates and time counts down.
8.
At end of cooking cycle oven beeps and shuts off.
• DONE displays.
Using the Oven Control
Programmed Keys
To cook food using keys preprogrammed with cooking sequences.
For instructions on programming keypads, see “Programming Keys” on page
8.
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press desired key.
• For
single key entry
, press only one key.
• For
double key entry
, press the two keys, in order, of the double digit
number for the desired cooking sequence.
• To change single or double key entry option, see User Options section in
this manual.
3. Oven begins to cook.
• POWER, power level and total cooking time display. If power level does
not display, microwave is cooking at full power.
• For additional cooking time, press preprogrammed key again
to begin cooking sequence again.
4.
At end of cooking cycle oven beeps and shuts off.
X2 - DOUBLE QUANTITY COOKING
(optional)
To increase cooking time by a specific cooking factor when cooking
more than one serving. The cooking factor is a percentage of the
original cooking time (from 10 to 100%).
1. Open oven door and place food in oven. Close door.
• READY displays. Fan and light will turn on.
2. Press X2 key.
• Display will read, “DOUBLE.”
• To clear, open and close the door or press the STOP/RESET Keypad
3. Press desired preprogrammed key or key sequence.
4. Oven begins cooking. Displayed cooking time is the total of original
cooking time plus the added time.
• Amount of time added is a percentage of the original preprogrammed
cooking time.
FACTORY PRESET PROGRAMS
KEYPAD
TIME
POWER
1
10 sec.
100%
2
20 sec.
3
30 sec.
4
45 sec.
5
1:00 min.
6
1:30 min.
7
2:00 min.
8
3:00 min.
9
4:00 min.
0
5:00 min.
Factory setting may vary by model
Interrupting
Operation
Open oven door or press
STOP/RESET key to interrupt
operation. Display continues to show
countdown time. Close door and press
START key to resume oven operation.