Flashing
Manual
00:50
Stage: 1
MW: 100%
©2020 Solwave ovens
Lancaster, Pennsylvania,17603
Page 8 of 16
Part No. 20152604
Original Instructions
Top Only Cooking
Bottom Only Cooking
Top and Bottom Cooking
Programming
Programming Keys
Oven is shipped from the factory for single key programming. To change the
oven default to allow double key programming, see
User Option
section. To
change the amount of time or the power level for a preset key:
1. Open and close oven door.
• READY displays.
• If STOP key is pressed before programming is complete, changes are
discarded and microwave exits programming mode.
2. Press PROGRAM SAVE key.
• Programming mode begins
• “Enter Program to Add/Review” displays
3. Press key to be reprogrammed.
• Power level and cooking time settings display.
4. Press TIME ENTRY to edit the amount of cooking time.
• Enter cooking time by using the number keys.
• Maximum cooking time is 60 minutes.
5. Press POWER LEVEL to edit the level of microwave power.
• For a lower microwave power, press keys 1 (for 10%)
through 9 (for 90%
• Press numeric key pad for desired level. Press same
numeric key pad again to reset power level to 100%
6. Press PROGRAM SAVE key to save new programming
changes to the key.
7. To discard changes, press STOP/RESET before pressing
PROGRAM SAVE.
Programming Multiple Stages
Stage cooking allows consecutive cooking cycles without interruption.
Up to four different cooking cycles can be programmed into a memory key.
To use stage cooking:
1. Follow steps 1 through 5 above.
2. Press STAGE key.
• This will begin programming for the next cooking stage
• Display indicates stage to be programmed
3. Enter cook time and power level as in steps 4 and 5 above.
• To enter another cooking stage for that key, press STAGE
key again.
•
Up to four different stages can be programmed.
4. Press PROGRAM SAVE key to save new programming
changes to the key.
• Total cooking time (all stages totaled) is 60 minutes
5. To discard changes, press STOP/RESET before pressing
PROGRAM SAVE.
Programming Top &
Bottom Only Cooking
1. Push the POWER LEVEL pad.
• Select and program the preferred
microwave power.
2. If the POWER LEVEL pad is
pushed a second time, “Top Only”
heating option will be selected and
displayed.
3. If the POWER LEVEL pad is
pushed a third time, “Bottom Only”
heating is selected and displayed.
4. If the POWER LEVEL button is
pushed a fourth time, the oven
resets and both top and bottom will
heat.
Flashing
Manual
Stage: 1
00:00
MW: 50%
Flashing
Manual
Stage: 1
00:00
MW: 50%