Solux SX-DT-900, Руководство пользователя

Страница: 32 / 108

26
2 long beeps upon a successful connection, or 3 short beeps upon a failed connection.
Method II: operating the terminal on the OLED screen.
Step1. Press Left Soft Key towards the window below. If the terminal has no connection record, it will
show the indication of “There is no connection record.”
Step2. Press Search to the window below for searching.
Step3. Wait for about 20 seconds and then Cradle list will be shown.
8
36 99 3
Step4. Use Navigation Key to move the cursor and press Scan/Select Key to connect with Cradle.
Step5. Wait for about 3 seconds, the terminal will respond with 2 long beeps upon successful
connection.
Step6. The Cradle connected to the terminal is labeled √.
Step7. If you want to disconnect the cradle connected successfully before, you can press Scan/Select
Key to disconnect it.
8
A
36 3 99 3
5-3-2 Wi-Fi
The terminal can be configured to send data to a PC, Notebook, PDA, and other instrument which
equipped with an integrated Wi-Fi module or receive data from these instruments under the same WLAN.
Two wireless operating modes have been provided: Station Mode and Access Point Mode.
5-3-2-1 Station Mode
1)
The terminal is used as a client and the other devices are used as servers in the same WLAN.
2) The terminal can connect to WLAN by wireless router and communicate with other devices that
connect to the same WLAN.
3)
The terminal initiates a connection to the servers and it can support up to 8 connections.
4) The terminal can only set up one communication channel with host at a time. It also can switch to
another channel for communicating with another host.