SOLTRON XL-75xtra DYNAMIC POWER, Руководство по эксплуатации

Страница: 121 / 152

Cleaning and maintenance
44
5.10 Cleaning or replacing UV lamps and
filter panels in the canopy
– Removing the canopy panel: see page 37.
The following components listed in the maintenance plan are fitted in the
canopy:
y
1.80 m UV low pressure lamps
y
Facial tanner UV low pressure lamps and the associated starter
y
Facial tanner UV high pressure lamps
y
Facial tanner filter panels
The facial tanner's UV low pressure lamps must be removed first so that the
UV high presure lamps and the filter panels can be changed.
– Remove the lamps.
– Remove the two upper low pressure lamps in the canopy so that you can
thenaccess the facial tanner's low pressure lamp starter.
Replacing the lamps: see page 41.
Replacing the starter (TWIN POWER, TURBO POWER): see page 42.
Changing the chip card (DYNAMIC POWER): see page 40.
UV high pressure lamps and filter panels: see page 42.
The assembly is the same process in reverse order.
When assembling the device please note:
– Support the canopy panel with one hand so that it does not fall down.
– Refit and retighten the screws. Refit the middle screws first and then the
outer screws.