SOLTRON Ergoline AFFINITY 700 (AC plus), Руководство по эксплуатации

Страница: 45 / 82

Cleaning and maintenance
11/2014 1015420-00 Operating instructions – 43/78
7.8.1 Low pressure lamps
WARNING!
Danger of burns from hot lamps and device parts!
If the tanning device was operated before being switched off
and opened, lamps and housing parts may be hot.
–
Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.

Replace faulty UV low pressure lamps immediately. Install replacement
lamps to the outer edges of the tanning area.

Always replace the entire set of lamps after the specified operating time.
– Turn 90° and carefully remove from the socket.
– UV low pressure lamps possess a reflector which directs the light out-
wards. The lamps must be mounted in such a way that the rear side of
the reflector is located on the device side.
– Push the pins vertically into the socket from above.