manualshive.com logo in svg

SOLTRON Ergoline AFFINITY 700 (AC plus), Руководство по эксплуатации

Поделиться
Скачать
SOLTRON Ergoline AFFINITY 700 (AC plus) Скачать руководство пользователя страница 17

Information for the studio operator

 

 

11/2014 

1015420-00 

Operating instructions – 15/78

 

 CAUTION! 

 

Damage to the device possible! 

Where there are great differences in temperature between 
the transport route and the installation site the device may 
not be put into operation immediately after being set up.  
–

 

Wait at least 2 hours before connecting the device to 
the power supply. 

  

  

 

Danger of failure! 

Danger of overheating by obstruction of the air routing. 
–

 

Observe the ventilation information to avoid serious 

system malfunctions. 

  
  

Environmental conditions 

 

Optimum ambient temperature: Between 68 °F (20 °C) and 95 °F (35 °C) 

 

Storage temperature: Between 5 °F (-15 °C) and +140 °F (+60 °C) 

  

The device is not to be used outdoors. 
Adaptation of the unit is required for operating altitudes greater than 6500 ft / 
2000 m above sea level in order to guarantee trouble-free operation. 
The device is not suitable for operation in mobile facilities (ships, buses, 
trains). Adaptation of the unit is required in order to guarantee trouble-free 
operation when used in mobile facilities. 
Please contact the customer service department without fail before putting the 
device into operation - see page 2. 

  

 

4.8

 

Export 

This device is exclusively intended for use in the USA and Canada and may 
not be exported to other countries and operated there! The manufacturer 

assumes no liability whatsoever in the event of non-compliance. High liability 
risks may occur for the exporter and/or the operator in the event of noncom-
pliance. 

  

4.9

 

MP3 music 

The personal use of an MP3 player or a smartphone during tanning is not a 
public broadcast in copyright terms, so that there is no obligation for registra-
tion or payment by the studio owner to the corresponding copyright owning 

company. Copyright laws apply to the owner of the MP3 player or smart-
phone. 
The same regulations apply for the official use of MP3 music files as for other 
music sources: As studio owner you are only allowed to use original audio 

obtained from legal sources. Proof of the legitimacy of any MP3 audio used 
should be available for viewing upon demand of any regulatory body. Please 
refer to http://www.riaa.com for more information. 

 

 

NOTE: 

Pre-recorded SD cards which are delivered as accessories 

for a JK audio system are also subject to payment obligation 
for commercial usage. 

  

 

Содержание Ergoline AFFINITY 700 (AC plus)



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды