manualshive.com logo in svg

SOLTRON Ergoline AFFINITY 700 (AC plus), Руководство по эксплуатации

Поделиться
Скачать
SOLTRON Ergoline AFFINITY 700 (AC plus) Скачать руководство пользователя страница 16

Information for the studio operator 

 

 

14/78 

 

4.5

 

Staff training 

As the operator you are obligated to train your personnel and instruct them in 
the established legal and accident prevention regulations. Ensure that your 

staff have understood and observe these instructions. This includes: 

 

information regarding intended use and foreseeable misuse 

 

safety instructions 

 

operating instructions 

 

cleaning and maintenance instructions 

–

 

Please make the instructions and additional information from the manu-
facturer available to the staff at their workplace. 

–

 

Regularly check your staff's safety consciousness of the risks, taking into 
account your operating instructions. 

–

 

Please ensure that the cleaning intervals are complied with, in particular 
cleaning after every use. 

–

 

Please ensure that your staff provide your customers with appropriate 
advice, in particular regarding tanning times, possible risks and the oper-
ation of the device. 

4.6

 

Guidelines 

This product is in conformity with the performance standards for sunlamp 
products under 21 CFR 1040.20, FDA and listed with ETL and CAN/CSA 22.2 
No. 224. 

  

4.7

 

Installation location 

4.7.1

 

Ventilation 

 CAUTION! 

 

Danger of failure! 

Danger of overheating by obstruction of the air routing. 
–

 

Observe the ventilation information to avoid serious 
system malfunctions. 

  

 

  

You can obtain data regarding the air supply and ventilation from the custom-

er service department (see page 2). 

4.7.2

 

Setup location 

 CAUTION! 

 

Salty air! Contaminated air! 

Device damage due to corrosion of the housing and electri-

cal components. 
–

 

Do not install the device at swimming pools. 

–

 

Do not operate the device in locations with aggressive 
environmental conditions (e.g. air containing chlorine). 

  

Содержание Ergoline AFFINITY 700 (AC plus)



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды