- 32 -
6.
ATC Mode
6.1.
Overview
EZL-410 can be controlled by AT commands in ATC mode. For example, the peer host IP
address can be set by AT+PRIP command and connect to the host by ATD command.
Therefore, EZL-410 communicates several hosts alternatively.
And also, it provides passive connection function by ATA command.
6.1.1.
AT command format
AT commands start with AT, and end <CR>.
AT command format is followed.
AT
Command
<CR>(0x0d)
The response code to AT command is followed.
Response message
<CR>(0x0d)
<LF>(0x0a)
Response Message
When ATV1 (initial setting)
When ATV0
Description
OK
0
command OK
CONNECT
1
TCP connected
NO CARRIER
3
TCP disconnected
ERROR
4
Command error
Set value
Set value
When query set value
(Example: AT+PRIIP?)
6.2.
Basic AT Command Set (Example: ATA, ATD etc.)
Command
Function
Description
A
passive connection
Listen connection (host → EZL-410 connection)
D
active connection
Connecting to host form EZL-410
E
Echo
Echo (E0 - no echo, E1-echo)
H
off-hook
disconnection
I
Inquiry
Output EZL-410 related-information
O
Online
To On-line State
V
enable result code
Result code (numeric-V0, alphabetic-V1)
Z
Reset
Reset
