- 21 -
- Select T2S (0) in the [MUX TYPE] field on ezConfig. Setup [LOCAL IP ADDRESS],
[LOCAL PORT], and the serial port settings according to a test environment as required.
When the setup is completed, pressing [WRITE] will save the changed values in ezTCP.
If an error message pops up during storing the configuration, check that ezTCP is
connected correctly, and then try again.
- In Windows' MS-DOS prompt window, check the IP address is set correctly by giving
the PING command. If the ezTCP IP address is set correctly, the PING results will be
displayed as follows. If a message, "Request timed out", is displayed, check that IP
address setup value again.
C:\>ping a.b.c.d
Pinging a.b.c.d with 32 bytes of data:
Reply from a.b.c.d: bytes=32 time=1ms TTL=64
Reply from a.b.c.d: bytes=32 time=1ms TTL=64
Reply from a.b.c.d: bytes=32 time=1ms TTL=64
Reply from a.b.c.d: bytes=32 time=1ms TTL=64
