- 20 -
is on, the current IP address, and the data throughput of the serial port are indicated.
Double-clicking each item on the MAC ADDRESS LIST will carry out the same
function.
ezConfig can be used to change the IP address related items, the serial port setup value,
the serial port operation mode, and how to setup ezTCP. This section describes these
functions briefly. For more information, see the following sections.
The following example shows how to read and change ezTCP's basic functions. Try
changing ezTCP setup value according to the following sequence:
- When the ezTCP power is turned on and the LAN cable is connected correctly,
pressing [PROBE] or [READ] button will display the following window:
- If a network-attached ezTCP is detected, the following message will be displayed. If a
message pops up indicating that there is no response from ezTCP, check that the power
is turned on and the cable is connected correctly, then try pressing [PROBE] or [READ]
button.
- If more than one ezTCP are detected, ezTCP's MAC ADDRESS will be displayed in
the [MAC ADDRESS LIST] box on ezConfig. Check if the MAC ADDRESS displayed
in the [MAC ADDRESS LIST] window corresponds to that printed on ezTCP main
body. The following screen shows this process:
