- 18 -
BAUD RATE
Baud Rate (bps)
DATA BITS
Data Bit Length
PARITY
Parity
Serial Port
FLOW CTRL
Flow Control
Communication
Mode
MUX TYPE
Communication Mode
WATER
MARK
Minimum Number of Bytes to
Attempt Connection/Transmission
Connection/
Connection
Termination Event
TIMEOUT
Connection Time Out
EZCFG
ezConfig Function enable/disable
Using Configuration
Method
ARP
ARP function eanble/disable
Floating IP
DHCP
DHCP(Dynamic Host Configuration
Protocol)
Telnet Password
PASSWORD
Password when Performing Remote
Login through Telnet
3.2.1.
ezConfig
The basic environment information of ezTCP can be configured through DHCP, ARP,
and ezConfig. This section takes an example of using ezConfig, which is a configuration
program via wired/wireless LAN. For the other configuration modes, see the following
sections. ezConfig can run on Microsoft Windows platform but may not operate on
some of the existing operating systems. The screen below shows the initial screen of
ezConfig:
ezConfig broadcast UDP data to communicate ezTCPs, so it can be used in local
network(If there is a gateway between ezTCP and PC, then ezConfig doesn’t work.)