CSW-M85 User’s Manual Ver. 1.6
Sollae Systems Co., Ltd.
- 51 -
http://www.sollae.co.kr
TCP STATE
TCP status of each port is shown in this section.
Table 6-2 TCP STATE
Message
Description
LISTEN
The session is waiting for TCP connection.
CLOSE
TCP connection is closed.
SYN_SENT
The session is sending “SYN” segment to a TCP server.
ESTABLISHED
TCP connection is established.
N/A
in UDP mode
Amount of data
Amount of data in each buffer is displayed. The unit is byte.
Table 6-3 SERIAL STATUS
Buffer
Description
sio_rx
The number of data which is received from the COM port
net_tx
The number of data which is sent to the remote host
net_rx
The number of data which is received from the remote host
sio_tx
The number of data which is sent to the COM port
ARP Table
This part shows ARP table on CSW-M85. When TCP connection is established or UDP
data communication is performed, the information of IP and MAC address is
automatically registered in the table. This information lasts for 1 minute so when 50
seconds have passed, CSW-M85 starts broadcasting the ARP packet in every second.
If there is no response until the time is 0, the information is removed. Otherwise, the
time is updated 60 seconds again.
Wi-Fi Status
Status of Wireless LAN Channel is displayed.
Table 6-4 Wi-Fi status
Item
Description
Channel
Current channel (Frequency band)
Link State
Maximum data rate of the link.
RSSI
Received Signal Strength Indication
Link Quality
Quality of the link
