CSW-M85 User’s Manual Ver. 1.6
Sollae Systems Co., Ltd.
- 19 -
http://www.sollae.co.kr
Setting CSW-M85
CSW-M85 uses ezManager as its configuration tool which is software operating on
MS Windows. This program is easy to use and doesn’t need installation. For setting
CSW-M85, search your CSW-M85 via serial port first. All the values of parameters are
set with the factory default. To apply CSW-M85 to your system, setting proper values
is required. Default values of major parameters are listed on table below. Keeping
these values without any changes are highly recommended for the simple test.
Table 2-1 default values of major parameters
Name
Default values
Network
Local IP Address
10.1.0.1
Subnet Mask
255.0.0.0
Option
TELNET
Checked
IP Address Search
Checked
Serial Port
(COM1)
Serial Type
RS232
Baud Rate
19,200bps
Parity
NONE
Data Bits
8
Stop Bit
1
Flow Control
NONE
Communication mode
TCP Server
Local Port
1470
WLAN
Topology
Infrastructure (Ad-hoc: If necessary)
SSID
sollae
Antenna
0 – Internal (chip antenna)
Security Settings
Inactivated
To use an external antenna, connect the antenna to U.FL socket and set the
parameter to External Antenna.
Figure 2-7 parameter for selecting antenna
