CSE-H21 User’s Manual Ver. 1.2
Sollae Systems Co., Ltd.
- 25 -
http://www.sollae.co.kr
Figure 3-5 ping test when the IP address is 10.1.0.1
3.3
AT command
In ATC mode, the user can set environment variables through the serial port using AT
command.
For more information, See “7. ATC Mode”.
3.4
Setting DHCP
Under environment with a network operating a DHCP server, DHCP protocol allows the user to
automatically set the IP address, subnet mask, gateway, and name server of ezTCP. Using DHCP
automatic setup function requires the user to check [DHCP] item on ezManager. Note that the
user may have to check [ARP] item according to the type of DHCP servers.
3.5
Setting PPPoE
PPPoE is used in most ADSL and VDSL. To use PPPoE function, PPPoE function should
be enabled and PPPoE ID and PPPoE password should be configured. The local IP
address of CSE-H21 is assigned automatically in PPPoE environment.
√ Some ADSL or VDSL modem use DHCP. Please contact your ISP (Internet Service
Provider).
