CIE-H14 User Manual Ver. 1.1
- 61 -
http://www.ezTCP.com
8.3.4
TX interval -
④
This option is for preventing data loss in the case that the serial device has very small
buffer size or does not have a buffer. The range of the value could be from 0 to 25 and the
unit is duration of sending 1 byte. For example, if you set this value to 5, each byte will be
transferred with duration of sending 5 bytes.
8.3.5
TCP Server / Client mode -
⑤
This mode is available on TCP client mode only. In this mode, you do not need to change
the mode for switching active or passive TCP connection. Note that the [Event Byte] option
should be set to 1 or lager value.
8.3.6
Separator -
⑥
Using this function, you can control the length of network packets by specific characters.
separator
options
Length
select the length between 0 ~ 4 bytes
Operation
Transmit Separators without additional bytes
Transmit Sepa 1 byte
Transmit Sepa 2 bytes
Table 8-2 separator
If you want to get more information about the above functions, refer to the technical
documents on the [Download] >> [Technical documents] page at our web site.
