CIE-H14 User Manual Ver. 1.1
- 28 -
http://www.ezTCP.com
4.5
Serial Configuration mode
4.5.1
Configuring Parameters
This is a mode for setting environmental parameters through the serial port. If you
cannot use the Network, this mode is only way to configure the parameters. Click the [Read]
button on the [Serial] tab on ezManager after entering this mode.
Refer to the [Serial Management Protocol] document on our website for details.
4.5.2
Revoking Serurity Options
CIE-H14 offers strong functions for security like filtering with password or MAC and IP
addresses. In the Serial Configuration mode, you can revoke all of these options. When you
forget the password, enter this mode to change or delete it.
4.6
ISP mode
4.6.1
Upgrading Firmware
ISP mode is for upgrading firmware. Upgrading Firmware is implemented by ezManager.
For more details about this, please refer to the clause 7.1.
4.6.2
Upgrading HTML
ISP mode can also upgrade HTML files. For more details about this, please refer to the
clause 7.2
4.6.3
Revoking Serurity Options
In the ISP mode, you can revoke all of these options like the serial configuration mode.
When you forget the password, enter this mode to change or delete it.
