CIE-H14 User Manual Ver. 1.1
- 13 -
http://www.ezTCP.com
1.6.3
Output Ports
The output ports of CIE-H14 are interfaced to relays (Normal Open) as shown below.
Figure 1-9 a circuit of the output port
The output port operates are as follows :
value
relay contact
0
OFF (open)
1
ON (short)
Table 1-4 values of the output port
The allowed output ports’ electrical current of voltage conditions are as in the following:
Voltage Condition
Allowed current
DC 28V
5A
Table 1-5 voltage conditions of the output port
Use a power relay, when users’ device uses AC or excesses the allowed maximum
current consumption.
Use a (-) shaped screwdriver to connect it with users’ devices since the output ports
are interfaced with a 5mm terminal block,
