65
USER’S MANUAL
SOLIS X 100
After the coffee is delivered the display
automatically returns to the factory settings.
Note:
You can also reprogram the coffee quanti-
ty for the 3 cup sizes in accordance with point
7.1 programming (change the factory settings).
4.4 Making coffee with pre-ground coffee
Rotate the coffee bean container to the
mark / stop
,
the noise emitted by the
brewing unit is normal;
the coffee quantity
indicator (21a) flashes! Open the cover and
put in a maximum of 2 level measuring
spoons of powered coffee (only use the
measuring spoon supplied).
Now press the corresponding selection
button (18) or (19).
Note:
Please put the coffee into the funnel slow-
ly, so that the filling opening does not get
blocked. The filling funnel is not a container and
the coffee must be used immediately.
Important:
Do not use water-soluble, freeze-
dried instant coffee or similar products,
only
pure ground coffee without additives.
After making pre-ground coffee, return the
grinder to the bean position
!
5.0 Making hot water
For tea, soups etc.
5.1 When the appliance is ready for use,
place a glass or cup directly under the
steam / hot water nozzle
and slowly open the
steam/hot water knob. Hot water will be dispen-
sed automatically. To stop the flow of water,
close the steam/hot water knob.
6.0 Making steam
To heat milk or other beverages and to make
cappuccino.
6.1 When the appliance is ready for use,
press the steam selection button (20)
Temperature indicator flashes. After approx. 10
seconds or latest when the temperature indica-
tor is lit permanently, open the steam knob and
allow the condensed water to flow into the drip
tray.
Note:
The fast opening of the steam knob will
avoid the escape of steam through the dispens-
ing head (normal pressure release).
6.2
Afterwards, immerse the swivel steam nozz-
le into the liquid to be heated and heat the liquid
using a circular movement from bottom to top.
6.3 If no further steam is required,
close the steam knob
and move the steam
nozzle back to the original position over the
drip tray
and switch off the steam selection
button (20).
