63
USER’S MANUAL
SOLIS X 100
The grinder is set to the middle position at the
factory.
Note:
Only pure coffee beans must be used
and no types of coffee with a caramelized or
aromatic content.
3.3 Remove the water container towards
the front and fill with fresh water (max.
1.5 liters).
To fill, either use the filling opening
or remove the cover. When replacing, firmly
press in the container to make sure that the
valve at the back opens.
Caution:
Only use fresh, cold water. Never use
mineral water, milk or any other liquids.
3.4 Press the main On/Off button. The
appliance heats up and carries out an
automatic rinse.
Both indicators (17a) and (24)
flash. As soon as these indicators no longer
flash, the appliance is ready for use (Vent the
appliance only, point 3.5, if indicator lamp 26
flashes).
Cold /Frost:
The appliance must be protected
against frost, therefore do not leave it overnight
in a car in winter, otherwise there is danger of
frost damage.
3.0 Starting up/First use
Prior to starting the appliance, please observe carefully the safety instructions
mentioned under point 1.0.
The appliance should never be used without water or without coffee beans
3.1 Unwind the power cord to the desired
length
(cable compartment in the bottom of the
appliance). Connect the appliance to an earthed
socket.
3.2 Remove the cover from the coffee
bean container and fill the container with
fresh coffee beans (approx. 270 g).
Properly
close the bean container with the cover.
Make sure bean container is aligned with the
bean position
.
