5. Operation
5. Operation
5.6 Advanced Settings - Technicians Only
NOTE:
This function is for authorised technicians only. Improper access
and operation may result in abnormal results and damage to the inverter.
Password required – restricted access – authorised technicians only
Un-authorised access may void the warranty. (Password"0010")
Settings
Password
2015-02-23 19 35
Please Input The Current Password
X
X
X
X
E S C
U P
D O W N
E N T
Y E S
=
< E N T >
N O
=
< E S C >
Figure 5.23 Enter Password
This function is used to select corresponding grid standards.
Figure 5.25 Select Standard
5.6.1 Select Standard
Settings
Select Standard
2015-02-23 19 35
Y E S
=
< E N T >
N O
=
< E S C >
4777_A
Select Standard:
Press the UP/DOWN keys to select the standard “4777_A”, “4777_B”,” 4777_C” and
“4777_N” for compliance with AS/NZS4777.2:2020. The standard “AS4777-15” is for
AS/NZS4777.2:2015.
The default password is “0010".
Please press “down” to move the cursor, press “up” to select the number.
After enter the correct password the Main Menu will display a screen and be able to
access to the following information.
1. Select Standard
2. ON/OFF
3. Calibrate
4. Reset Password
5. Restar HMI
6. Storage Energy Set
7. Export Power Set
8. HMI Update
9. DSP Update
10. BaudRate RS485
11. Special Settings
Advanced
Settings
2015-02-23 19 35
Select Standard
Reset
Password
Calibrate
HMI
Update
Export
Power
Set
DSP
Update
BaudRate RS485
ON
/
OFF
Figure 5.24 Advanced Settings
Storage Energy Set
Restart HMI
Special Settings
.36.
.37.
NOTE:
To check the firmware version, select the standard and you will find 'firmware
version' parameter. A2 is the current version that comply with AS/NZS
4777.2:2020.
