E
40
fig. 8
fig. 7
dISASSeMBLInG
The BLender
Step 1
Always ensure the Solis Master Blender is switched
off by pressing the ‘Power’ button on the control
panel. Then switch off at the power outlet and
unplug the power cord.
Step 2
Remove the blender jug from the motor base
by grasping the handle and lifting the jug in
an upward direction.
Remove the blade assembly by upturning the
blender jug and turning the Blade Removal System
clockwise (see Fig 7), then lift upwards and away
from the base of the blender.
Step 3
Remove the silicon seal from the blade
assembly (see Fig.8).
care and cleanInG
Cleaning the motor base
• Wipe the motor base with a soft, damp cloth then
dry thoroughly.
• Wipe any excess food particles from the power
cord.
nOTe:
Do not use abrasive scouring pads or cleaners
when cleaning the parts or motor base as they may
scratch the surface.
nOTe:
The lid, inner lid, blade assembly and silicon seal
may be washed in the dishwasher in the top shelf
only on a standard wash. The blender jug may be
placed in the bottom shelf.
Cleaning the blender jug, lid, inner lid and
blade assembly
•
Wash all parts in warm soapy water with a soft
cloth. Use a kitchen bottle brush to dislodge stub-
born foods. Rinse and dry thoroughly.
removing stubborn or strong food stains
and odours
Strong smelling foods such as garlic, fish and some
vegetables such as carrots may leave an odour or
stain on the blender jug and lid. To remove, soak
blender jug and lid for 5 minutes in warm soapy
water. Then wash with a mild detergent and warm
water, rinse well and dry thoroughly.
Storage
Store your Solis Master Chef Blender upright with
the blender jug, lid and inner lid assembled and
inserted on the motor base or beside it. Do not
place anything on top.
The blending blades are extremely
sharp. Avoid any contact with fingers and
hands. Use caution when handling and
storing.
Anl_MasterChefBlender_2.indd 40
12.6.2008 10:47:26 Uhr
