SOLINTEG MHS-3.6K-30 Скачать руководство пользователя страница 53

Страница: 53 / 88

User Manual

MHS-3~8K

series

Commissioning

※

6.1 App Preparation

①

Install the Local configuration App and Cloud monitoring App with latest version. Refer

to "8.2 Cloud monitoring App and 8.3 Local configuration App".

②

password from the distributor/installer or Solinteg, skip this step.

※

6.2 Inspection Before Commissioning

Check the following items before starting the inverter:

①

All equipment has been reliably installed.

②

DC switch and AC circuit breaker are in the "OFF" position.

③

The ground cable is properly and reliably connected.

④

The AC cable is properly and reliably connected.

⑤

The DC cable is properly and reliably connected.

⑥

The communication cable is properly and reliably connected.

⑦

The vacant terminals are sealed.

⑧

No foreign items, such as tools, are left on the top of the machine or in the junction box (if

there is).

⑨

The AC circuit breaker is selected in accordance with the requirements of this manual

and local standards.

⑩

All warning signs & labels are intact and legible.

※

6.3 Commissioning Procedure

If all of the items mentioned above meet the requirements, proceed as follows to start up
the inverter for the first time.

①

Turn on the AC breaker.

②

Turn on the lithium battery switch. Power on the battery pack manually if a battery is

equipped.

③

Turn on the DC switch, the DC switch may be integrated in the inverter or installed by

the customer.

④

The inverter will work properly after turning on the DC and AC breakers on the condition

the weather and grid meet requirements. The time for entering the operating mode may

vary according to the chosen safety code.

⑤

Observe the LED indicator to ensure that the inverter operates normally.

Содержание MHS-3.6K-30

























































































Результаты поиска

Содержание MHS-3.6K-30

Отзывы:

Похожие инструкции для MHS-3.6K-30

Бренды по названию

Популярные бренды

SOLINTEG MHS-3.6K-30, Руководство пользователя

Результаты поиска

Содержание MHS-3.6K-30

Отзывы:

Похожие инструкции для MHS-3.6K-30

Бренды по названию

Популярные бренды