EN
Solight TE44 Wireless thermometer
Operating Instructions
Dear customer, thank you for purchasing our product. In order that we may serve you safely and to your complete satisfaction,
please read and follow these instructions carefully. That way you can avoid inappropriate use or damage. Prevent the unauthorised
use of this device and always respect all conventions applicable to the handling of electric appliances. Please retain these
Operating Instructions in case of future need. This device is intended exclusively for household use and may be used only by
adults. This product must never be exposed to high humidity (for example, in a bathroom) nor come into contact with fluids. Do not
place the device near any household electronics or computers to avoid interference.
Thermometer description
1. ALARM
2. MAX/MIN
3. SNOOZE
4. SET
5. DOWN/CF
6. UP
Display description
1. Outside temperature indicator
2. Room temperature indicator
3. Alarm indicator
4. Time
5. Alarm
Sensor description
Inserting the battery and activating the wireless sensor
1. Open the battery compartment and insert 2x AAA 1.5V alkali batteries into the main unit and the sensor. Please take heed of
the polarity markings on the unit.
2. Close the battery compartment.
3. You can pair the main unit and the wireless sensor by pressing and holding the "UP" button on the main unit.
Note: The battery compartment of the main unit is located under the collapsible stand. The stand must be expanded from the body
of the main unit and then the battery department cover may be removed. Caution: improper handling can result in damage to the
stand!
Setting time
1. Press and hold the "SET" button for 2 seconds.
2. The active segment of the display will begin to flash. You can change the values by pressing the "UP" or "DOWN" buttons. If
you press and hold either of these buttons for 2 seconds or more, you will be able to change the values at approx. 5 steps per
second.
3. By pressing the "SET" button you will save the set value and continue to setting the next parameter.
4. The order of values for setting is as follows: Hours > Minutes > Exit
5. If you do not press any button for 20 seconds or more, the currently displayed value is saved and the display switches into
standard display.
6. With a short press of the "UP" button you may change the time format display 12/24H.
LCD Display
Wall mount opening
Battery compartment
Collapsible stand
LCD display
Wall mount opening
Battery compartment
Thermometer functions
time, alarm
12/24H time format
display of temperatures in
°C or °F
memory min./max. values
measurement of indoor temperatures from -
9°C to
+50°C
measurement of outdoor temperatures from -
35°C
to +5
0°C
wireless
sensor
for
outdoor
temperature
meassuring
