background image

 

5. Maintenance

 

Very little maintenance is required to keep your inverter operating properly. 

You should clean the exterior of the unit periodically with a damp cloth to 

prevent accumulation of dust and dirt. 

At the same time, tighten the screws on the DC input terminals. 

6. Warranty

 

We warrant this product against defects in materials and workmanship for a 

period of 24 months from the date of purchase and will repair or replace any 

defective Power Inverter when directly returned, postage paid, to us. 

This warranty will be considered void if the unit has suffered any obvious 

physical damage or alteration either internally or externally and does not  

cover damage arising from improper use such as plugging. 

The unit into an unsuitable power sources attempts to operate products with 

excessive power consumption requirements, or use in unsuitable environments. 

This is the only warranty that the company makes. 

No other warranties express or imply including warranties of merchantability  

and fitness for a particular purpose. 

Repair and replacement are your sole remedies and the company shall not be 

liable for damages, whether direct, incidental, special or consequential, even 

though caused by negligence or other fault. 

 

 

17 

Содержание S600 Series

























Отзывы: