Solidyne 542 APC, Руководство пользователя

Страница: 20 / 44

Time Graph
It displays a graph that shows the evolution of the modu-
lation over time . The display can be switched between:
✔
MPX level
✔
modulation measured by the internal FM tuner
✔
MPX ITU BS412 power
3.4.3 SETUP mode
The SETUP mode allows the user to edit the parameters
of the 542APC. The access to this mode can be re-
stricted by password.
In the SETUP screen,
a slide-menu is enabled on the left
of the screen, which contains all the instances and op-
tions of the processor.
WARNING:
✔
Always press SAVE after change a value in
a processing stage. The button SAVE will
flash when changes are not saved.
✔ When the user edit a system setting, the changes are saved
automatically.
✔ The current preset is a system value. When the current pre-
set is changed, the new value is saved automatically.
3.5 AUDIO INPUTS
To access to the input set-
tings, click on the main menu
the option AUDIO INPUT.
Each input has the following controls:
3.5.1 GAIN
Adjusts the level of the input signal in a range of +/- 14
dB . For the analog inputs, the “zero” value corresponds
to the +4dBu level referred to -18 dBfs (AES K18). This
represents 18dB of headroom.
The input gain is adjusted so that 0VU peaks on the on-
air mixing console range from –22 to -9 dBfs on the pro-
cessor's input level meter.
3.5.2 TRIM R
Gain compensation for the right channel. It allows to fix
unbalances between channels, in a range of +/-3dB.
3.5.3 ST/MONO
Switch the input between STEREO or MONO (L+R) .
Figure 16: Analog inputs XLR and ETHERNET
3.5.4 Main source and fold-back
Figure 17: AES3 input and fold-back options
The active input is set in the “MAIN SOURCE” drop-down
menu. The 542APC fold-back feature switches the active
input to an alternative input if the MAIN SOURCE fails. Up
to two alternative inputs can be defined.
The fold-back will take place when the following conditions
occurs:
Page 20 Audio Processing Core - SOLIDYNE 542 APC