Solidyne 542 APC, Руководство пользователя

Страница: 19 / 44

 If you don't have the unit in sight; to know the IP ad-
dress use the "Solidyne Discovery and Update" soft-
ware, available at the following link:
http://www.solidynepro.us/download/
setupDiscovery2.rar
3. Using a computer of the LAN, enter the IP ad-
dress in a web browser (Chrome is recom-
mended).
4. Browser will load the web interface of 542APC,
that are web pages generated by the 542APC.
3.4.1 Remote access via Internet
To access a 542 processor connected to an external net-
work via the Internet, it is recommended to use remote
desktop software. On the LAN to which the processor is
connected, a computer must have TeamViewer,
pcAnywere, or similar. Accessing that computer remotely,
run a web browser (Google Chrome recommended) and
access the 542APC web interface.
This method allows the user to remotely command the
processor, and even install firmware updates without risk,
because communication between the remote computer
and the 542APC takes place within the local network. The
Internet only intercedes in the control of the remote com-
puter.
3.4.2 Status/home screen
The home screen is a monitoring panel that shows the
status and the action of all stages. It is subdivided into
sections that can be expanded or collapsed by pressing
the ± icon. In this way, the user organizes the monitoring
screen at their convenience.
Figure 15 - Expand/collapse sections

The screenshots of the control interface are shown
with inverted colors , to facilitate the printing of this
manual.
Monitoring area
The upper zone is fixed and remains visible in all screen
modes, both in the MONITORING screen and in the
SETUP screen.
It contents the following indicators:
•
Signal level on the active input (RMS and peak in
dBFS)
•
Processing meters: status of the Enhancers (on/
off); AGC (dB); reduction gain meters for compres-
sors and limiters (dB); clippers action (active/inac-
tive); wide-band limiter (dB) and MPX clipper (dB).
•
Level on the audio outputs: A double-meter shows
peak and RMS value. The Loudness Meter shows
the audio level according the EBU-R128 norms.
The upper row shows:
•
The IP address.
•
The signal source and the level for the HEAD-
PHONES (the web control remember the level as-
signed to each source).
•
The USER; to enter to the screen SETUP when the
password is enabled.
•
A button to switch to SETUP screen.
The status view does not allow to edit settings or change
the processing. To be able to edit the configuration, enter
to the mode SETUP (with the button located in the upper
right corner of the window).
Preset and Sound Wizard
This section shows the current preset and simplified Wiz-
ard controls; that allow the user to quickly customize the
character of the sound.
The user can change the current preset; edit the user pre-
sets with the Wizard controls and access the creation of
new presets. The –CLICK HERE TO EDIT– option ac-
cesses SETUP mode to save changes or create presets.
FM receiver – Monitor Analyzer
Shows the most relevant parameters of FM transmission
analysis. The receiver configuration and advanced re-
ports are obtained in the SETUP mode, in the FM Re-
ceiver menu option (see below).
Audio Inputs and Outputs
This section displays the level indicators for the audio in-
puts and outputs, and for the MPX1 and MPX2 compos-
ite outputs.
Audio Processing Core - SOLIDYNE 542 APC Page 19