Working with Projects and Titles
At least one Project and Title must be present before you can store a TR Setup. Select
SSL
followed by
Proj
.
Now select
New Proj
and the system will automatically create a new Project and Title; logically these will be
named Project 1 and Title 1 (if no previous projects exist).
If Projects have been previously created, when you press the
Proj
key, the screen will display a list of existing
Projects. Use the lefthand encoder to scroll through the list and when you find the Project you require, press
the encoder switch (or soft key below the encoder) that represents the
Select
function. This makes that Project
current (as indicated by the entry being highlighted in yellow, with the word
selected
after its name) and
reveals the Titles in that Project. To create a new Title in a Project, select
New Title
. Titles and Projects are
automatically numbered in sequence of creation. Select
Copy Title
to copy the selected Title.
Note that the top line of the display always indicates the current Project and current Title. Use the
Select
rotary
control to scroll through lists of Projects, Titles, etc., and the encoder switch to select them. To return at any
time to the Project list, press the encoder switch for
Back
.
Saving a TR Setup
Once a new Title has been created, or a previous Title is selected, press TR followed by Store and the current
console settings will be saved in the next available TR Setup. New Setups are automatically named TR - n
starting at ‘1’. If a Setup is deleted (see below) then its number will not be re-used. The only exception to this is
if all Setups are deleted; the numbering will then restart from ‘1’. Setups are initially saved to Duality’s flash
memory but may be later transferred to your DAW project folder (see
Copying TR Setups to a DAW Folder
).
Project 1 :: Title 1
Select
Project 1 : : Title 1 - selected
Project 2 : : Title 2
TR
Del
SSL
Auto
Con
Lnks
Daw
Misc
Proj
Back
NewTitle
CopyTitle
Duality Operator’s Manual
4 - 3
Total Recall
